Pedrollo 2-4 CP Series RANGE OF PERFORMANCE 

Flow rate up to 130 l/min (7.8 m³/h) 
Head up to 50 m 

LIMITS OF USE 
Manometric suction lift up to 7 m 
Liquid temperature up to + 40°C 
Environment temperature up to+ 40°C 

INSTALLATION AND USE 
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. 
DUE TO THEIR RELIABILITY, QUIET RUNNING AND LOW MAINTENANCE, THEY ARE SUITABLE FOR DOMESTIC APPLICATIONS INCLUDING WATER SUPPLIES (AS A PRESSURE SET), GARDEN IRRIGATION, ETC. 
The pumps must be installed in enclosed places, or at least protected againstinclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
BODY BACK-PLATE: stainless steel AISI 304. 
IMPELLERS: of the type with centrifugal radial flow, made of technopolymer(approved for drinking water). 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLOelectric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. 
2-3-4CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
2-3-4CP: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44. 
REGISTERED MODEL

Pedrollo 2-4 CP Series RANGE OF PERFORMANCE 

Flow rate up to 130 l/min (7.8 m³/h) 
Head up to 50 m 

LIMITS OF USE 
Manometric suction lift up to 7 m 
Liquid temperature up to + 40°C 
Environment temperature up to+ 40°C 

INSTALLATION AND USE 
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. 
DUE TO THEIR RELIABILITY, QUIET RUNNING AND LOW MAINTENANCE, THEY ARE SUITABLE FOR DOMESTIC APPLICATIONS INCLUDING WATER SUPPLIES (AS A PRESSURE SET), GARDEN IRRIGATION, ETC. 
The pumps must be installed in enclosed places, or at least protected againstinclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
BODY BACK-PLATE: stainless steel AISI 304. 
IMPELLERS: of the type with centrifugal radial flow, made of technopolymer(approved for drinking water). 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLOelectric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. 
2-3-4CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
2-3-4CP: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44. 
REGISTERED MODEL

PEDROLLO 2-4 CP Series RANGE OF PERFORMANCE 

Flow rate up to 130 l/min (7.8 m³/h) 
Head up to 50 m 

LIMITS OF USE 
Manometric suction lift up to 7 m 
Liquid temperature up to + 40°C 
Environment temperature up to+ 40°C 

INSTALLATION AND USE 
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. 
DUE TO THEIR RELIABILITY, QUIET RUNNING AND LOW MAINTENANCE, THEY ARE SUITABLE FOR DOMESTIC APPLICATIONS INCLUDING WATER SUPPLIES (AS A PRESSURE SET), GARDEN IRRIGATION, ETC. 
The pumps must be installed in enclosed places, or at least protected againstinclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
BODY BACK-PLATE: stainless steel AISI 304. 
IMPELLERS: of the type with centrifugal radial flow, made of technopolymer(approved for drinking water). 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLOelectric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.. 
2-3-4CPm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
2-3-4CP: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44. 
REGISTERED MODEL