Pedrollo 6 SR Series Submersible Pump
RANGE OF PERFORMANCE
Flow rate up to 600 l/min (60 m³/h)
Head up to 164 m
LIMITS OF USE
Liquid temperature up to +30°C
Sand content up to 100 g/m3
Starts/hour: 20 at regular intervals
INSTALLATION AND USE
THEY ARE RECOMMENDED FOR PUMPING CLEAN WATER WITH A SAND CONTENT NO HIGHER THAN 100 g/m3. THEIR HIGH EFFICIENCY AND RELIABILITY MAKE THEM SUITABLE FOR USE IN THE DOMESTIC, CIVIL AND INDUSTRIAL SECTORS, INCLUDING FOR WATER SUPPLIES AS PART OF A PRESSURE SET, IRRIGATION, WASHDOWN SYSTEMS, PRESSURE BOOSTING AND FIRE FIGHTING SYSTEMS.
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304 for 6SR36-44, nickel-plated cast iron for 6SR9-12-18-27 with 3" gas threaded port UNI ISO 228-1.
NON-RETURN VALVE: stainless steel AISI 304.
IMPELLERS: glass filled technopolymer covered with special rubber
DIFFUSER HOUSING: stainless steel AISI 304.
DIFFUSERS: technopolymer reinforced with glass fibre .
PUMP CASING: stainless steel AISI 304.
PUMP SHAFT: stainless steel AISI 304.
PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
MOTOR BRACKET: nickel-plated cast iron, dimensions to NEMA standards.
DRIVE COUPLING: stainless steel AISI 420.
SCREWS, FILTER AND CABLE COVER: stainless steel AISI 304.
MOTOR: Pedrollo 4" submerged electric motor(up to 3 kW)
Pedrollo 6" submerged electric motor(from 4 to 30 kW)
6SR: three-phase380÷415 V - 50 Hz.
PROTECTION: IP 68.
STANDARD FEATURES:
6SR Available in three-phase only.
4” motors have 1.5m power cable
6” motors have 4m power cable
|
 |
Pedrollo 6 SR Series Submersible Pump
RANGE OF PERFORMANCE
Flow rate up to 600 l/min (60 m³/h)
Head up to 164 m
LIMITS OF USE
Liquid temperature up to +30°C
Sand content up to 100 g/m3
Starts/hour: 20 at regular intervals
INSTALLATION AND USE
THEY ARE RECOMMENDED FOR PUMPING CLEAN WATER WITH A SAND CONTENT NO HIGHER THAN 100 g/m3. THEIR HIGH EFFICIENCY AND RELIABILITY MAKE THEM SUITABLE FOR USE IN THE DOMESTIC, CIVIL AND INDUSTRIAL SECTORS, INCLUDING FOR WATER SUPPLIES AS PART OF A PRESSURE SET, IRRIGATION, WASHDOWN SYSTEMS, PRESSURE BOOSTING AND FIRE FIGHTING SYSTEMS.
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304 for 6SR36-44, nickel-plated cast iron for 6SR9-12-18-27 with 3" gas threaded port UNI ISO 228-1.
NON-RETURN VALVE: stainless steel AISI 304.
IMPELLERS: glass filled technopolymer covered with special rubber
DIFFUSER HOUSING: stainless steel AISI 304.
DIFFUSERS: technopolymer reinforced with glass fibre .
PUMP CASING: stainless steel AISI 304.
PUMP SHAFT: stainless steel AISI 304.
PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
MOTOR BRACKET: nickel-plated cast iron, dimensions to NEMA standards.
DRIVE COUPLING: stainless steel AISI 420.
SCREWS, FILTER AND CABLE COVER: stainless steel AISI 304.
MOTOR: Pedrollo 4" submerged electric motor(up to 3 kW)
Pedrollo 6" submerged electric motor(from 4 to 30 kW)
6SR: three-phase380÷415 V - 50 Hz.
PROTECTION: IP 68.
STANDARD FEATURES:
6SR Available in three-phase only.
4” motors have 1.5m power cable
6” motors have 4m power cable
|
|
Pedrollo 6 SR Series Submersible Pump
RANGE OF PERFORMANCE
Flow rate up to 600 l/min (60 m³/h)
Head up to 164 m
LIMITS OF USE
Liquid temperature up to +30°C
Sand content up to 100 g/m3
Starts/hour: 20 at regular intervals
INSTALLATION AND USE
THEY ARE RECOMMENDED FOR PUMPING CLEAN WATER WITH A SAND CONTENT NO HIGHER THAN 100 g/m3. THEIR HIGH EFFICIENCY AND RELIABILITY MAKE THEM SUITABLE FOR USE IN THE DOMESTIC, CIVIL AND INDUSTRIAL SECTORS, INCLUDING FOR WATER SUPPLIES AS PART OF A PRESSURE SET, IRRIGATION, WASHDOWN SYSTEMS, PRESSURE BOOSTING AND FIRE FIGHTING SYSTEMS.
CONSTRUCTION CHARACTERISTICS
DELIVERY BODY: stainless steel AISI 304 for 6SR36-44, nickel-plated cast iron for 6SR9-12-18-27 with 3" gas threaded port UNI ISO 228-1.
NON-RETURN VALVE: stainless steel AISI 304.
IMPELLERS: glass filled technopolymer covered with special rubber
DIFFUSER HOUSING: stainless steel AISI 304.
DIFFUSERS: technopolymer reinforced with glass fibre .
PUMP CASING: stainless steel AISI 304.
PUMP SHAFT: stainless steel AISI 304.
PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
MOTOR BRACKET: nickel-plated cast iron, dimensions to NEMA standards.
DRIVE COUPLING: stainless steel AISI 420.
SCREWS, FILTER AND CABLE COVER: stainless steel AISI 304.
MOTOR: Pedrollo 4" submerged electric motor(up to 3 kW)
Pedrollo 6" submerged electric motor(from 4 to 30 kW)
6SR: three-phase380÷415 V - 50 Hz.
PROTECTION: IP 68.
STANDARD FEATURES:
6SR Available in three-phase only.
4” motors have 1.5m power cable
6” motors have 4m power cable
|
|
