POMPA Pedrollo CK memiliki kemampuan hingga  kapasitas 50 liter per menit

Pompa Pedrollo CK memilki kemampuan head mencapai 51 meter, Dimana kemampuannya dalam menyedot atau menghisap air yaitu hingga 9 meter dan merupakan keunggulannya dibandingkan dengan pompa lain yang hanya 5 meter. 

Dalam mentrasnfer air Pompa Pedrollo CK juga dapat mentransfer air hingga 90 derajat celcius, dan dapat dipasang pada keadaan sekitar yaitu pada 40 Derajat Celcius. 

Pompa ini memiliki konstruksi material pada badan pompa yaitu bahan cast iron dan memliki pipa drat ISO 228/I , Pompa pedrollo CK memiliki impeller dengan bahan BRASS-kuningan dengan bahan Shaft Stainless Steel , mechanical seal ceramic graphite viton. Bila User membutuhkan Pompa Pedrollo CK dengan kebutuhan single phase atau 220 V maka bisa dengan tipe CKm sehingga cocok untuk keperluan rumah tangga.

Macam-macam model dan tipe dari CK dan CKm Pedrollo antara lain : 

- Pedrollo CKm 50

- Pedrollo CK 50

- Pedrollo CK 50- BP

- Pedrollo CKm 80

- Pedrollo CK 80 E

- Pedrollo CK 90 E

RANGE OF PERFORMANCE 
Flow rate up to 50 l/min (3 m³/h) 
Head up to 51 m 

LIMITS OF USE 
Manometric suction lift up to 9 m 
Liquid temperature up to + 90°C (+55°C for diesel fuel) 
Environment temperature up to + 40°C 

INSTALLATION AND USE 
THEY ARE RECOMMENDED FOR PUMPING DIESEL FUEL, CLEAN WATER WITHOUT ABRASIVE PARTICLES AND LIQUIDS THAT ARE CHEMICALLY NON AGGRESSIVE TO THE MATERIALS FROM WHICH THE PUMP IS MADE. DUE TO THEIR OPERATING PRINCIPLE, THEY ARE IDEAL WHERE A COMPACT SELF-PRIMING PUMP IS NEEDED OR WHERE LIQUID SUPPLY IS IRREGULAR OR CONTAINS AIR. 
The pumps must be installed in enclosed places, or at least protected against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
MOTOR BRACKET (patent nº 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. 
IMPELLER: brass of the star type with open radial vanes. 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - VITON. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
CKm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
CK: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44. 
REGISTERED MODEL

RANGE OF PERFORMANCE 
Flow rate up to 50 l/min (3 m³/h) 
Head up to 51 m 

LIMITS OF USE 
Manometric suction lift up to 9 m 
Liquid temperature up to + 90°C (+55°C for diesel fuel) 
Environment temperature up to + 40°C 

INSTALLATION AND USE 
THEY ARE RECOMMENDED FOR PUMPING DIESEL FUEL, CLEAN WATER WITHOUT ABRASIVE PARTICLES AND LIQUIDS THAT ARE CHEMICALLY NON AGGRESSIVE TO THE MATERIALS FROM WHICH THE PUMP IS MADE. DUE TO THEIR OPERATING PRINCIPLE, THEY ARE IDEAL WHERE A COMPACT SELF-PRIMING PUMP IS NEEDED OR WHERE LIQUID SUPPLY IS IRREGULAR OR CONTAINS AIR. 
The pumps must be installed in enclosed places, or at least protected against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
MOTOR BRACKET (patent nº 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. 
IMPELLER: brass of the star type with open radial vanes. 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - VITON. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
CKm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
CK: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44. 
REGISTERED MODEL

RANGE OF PERFORMANCE 
Flow rate up to 50 l/min (3 m³/h) 
Head up to 51 m 

LIMITS OF USE 
Manometric suction lift up to 9 m 
Liquid temperature up to + 90°C (+55°C for diesel fuel) 
Environment temperature up to + 40°C 

INSTALLATION AND USE 
THEY ARE RECOMMENDED FOR PUMPING DIESEL FUEL, CLEAN WATER WITHOUT ABRASIVE PARTICLES AND LIQUIDS THAT ARE CHEMICALLY NON AGGRESSIVE TO THE MATERIALS FROM WHICH THE PUMP IS MADE. DUE TO THEIR OPERATING PRINCIPLE, THEY ARE IDEAL WHERE A COMPACT SELF-PRIMING PUMP IS NEEDED OR WHERE LIQUID SUPPLY IS IRREGULAR OR CONTAINS AIR. 
The pumps must be installed in enclosed places, or at least protected against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
MOTOR BRACKET (patent nº 1289150): aluminium with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity. 
IMPELLER: brass of the star type with open radial vanes. 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - VITON. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
CKm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
CK: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44. 
REGISTERED MODEL