Ukuran Kemampuan Pompa Pedrollo HF
Flow rate up to 1800 l/min (108 m³/h) / Kapasitas mencapai 1800 liter per menit
Head up to 19 m / Tekanan dorong hingga mencapai 19 meter

LIMITS OF USE / Cakupan Penggunaannya 
Manometric suction lift up to 7 m  / Daya hisap pompa mencapai 7 meter
Liquid temperature up to + 90°C  / Mampu mentransfer Liquid mencapai 90 Derajat Celcius
Environment temperature up to + 40°C / Pompa dapat terpasang pada temperatur 40 Derajat Celcius

INSTALLATION AND USE  / Instalasi dan Penggunaan 
THE HF SERIES IS RECOMMENDED FOR USE IN THE CIVIL, AGRICULTURAL AND INDUSTRIAL FIELD. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM LAKES, RIVERS, WELLS, OR FOR INDUSTRIAL APPLICATIONS THAT NEED TO ACHIEVE LARGE FLOW RATES AT MEDIUM-LOW HEADS. 
The pumps must be installed in enclosed places, or at least protected against inclement weather. 

Instalasi dan Penggunaan  Pompa Pedrollo HF Seri ini adalah dapat digunakan pada pertanian, lingkungan industri dan pabrik serta pada konstruksi industri. Dan penggunaan yang berkesinambungan pada irigasi dan penyiraman air secara terus menerus seperti pada danau, sungai , dan juga penggunaaan industri yang membutuhkan daya dorong rendah dengan kemampuan kapasitas air keluar yang cukup besar. 

Pompa Pedrollo HF ini harus diinstalasikan pada ruangan yang tertutup dan setidaknya minimal terproteksi pada iklim yang cukup ekstrem. 

Mebutuhkan Pompa Pedrollo HF maka cukup menghubungi PT. Osmo Marina Mandiri 021 - 29070732

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
IMPELLER: brass, of the type with centrifugal radial flow. 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
HFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
HF: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44.

Pompa Pedrollo HF Centrifugal Air bersih ini memiliki beberapa Varians yaitu :

1. HF 70 A : Pompa Pedrollo HF 70 A ini memiliki head  25-39 meter  dan capacity 50 - 300 lpm

2. HF  30 A : Pompa Pedrollo HF 30 B ini memiliki head  18- 23 meter  dan capacity 600 -2000 lpm

3. HF 51 A : Pompa Pedrollo HF 51 A ini memiliki head  8- 21 meter  dan capacity  50 - 300 lpm

4. HF 50 B : Pompa Pedrollo HF 50 B ini memiliki head  5-15,5 meter  dan capacity 100- 500 lpm 

5. HF 5 AM : Pompa Pedrollo HF 5 AM ini memiliki head  10-22 meter  dan capacity 100- 500 lpm

6. HF 30 B : Pompa Pedrollo HF 30 B ini memiliki head  13- 18 meter  dan capacity 600 -2000 lpm

7. HF 20 A : Pompa Pedrollo HF 30 B ini memiliki head  2- 18, 5 meter  dan capacity 400 -1800 Lpm

8. HF 8 B : Pompa Pedrollo HF 8 B ini memiliki head  9- 21 meter  dan capacity 200 -1200 lpm

9. HF 6 C : Pompa Pedrollo HF 6 C ini memiliki head   3 - 11,7 meter dan capacity 20 - 1000 lpm

RANGE OF PERFORMANCE 
Flow rate up to 1800 l/min (108 m³/h) 
Head up to 19 m 

LIMITS OF USE
Manometric suction lift up to 7 m 
Liquid temperature up to + 90°C 
Environment temperature up to + 40°C 

INSTALLATION AND USE 
THE HF SERIES IS RECOMMENDED FOR USE IN THE CIVIL, AGRICULTURAL AND INDUSTRIAL FIELD. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM LAKES, RIVERS, WELLS, OR FOR INDUSTRIAL APPLICATIONS THAT NEED TO ACHIEVE LARGE FLOW RATES AT MEDIUM-LOW HEADS. 
The pumps must be installed in enclosed places, or at least protected against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
IMPELLER: brass, of the type with centrifugal radial flow. 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
HFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
HF: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44.

RANGE OF PERFORMANCE 
Flow rate up to 1800 l/min (108 m³/h) 
Head up to 19 m 

LIMITS OF USE
Manometric suction lift up to 7 m 
Liquid temperature up to + 90°C 
Environment temperature up to + 40°C 

INSTALLATION AND USE 
THE HF SERIES IS RECOMMENDED FOR USE IN THE CIVIL, AGRICULTURAL AND INDUSTRIAL FIELD. THE HIGH FLOW RATES AND CONTINUOUS RATING MAKE IT IDEAL FOR IRRIGATION WITH FLOWING AND SPRINKLING WATER, FOR DRAWING WATER FROM LAKES, RIVERS, WELLS, OR FOR INDUSTRIAL APPLICATIONS THAT NEED TO ACHIEVE LARGE FLOW RATES AT MEDIUM-LOW HEADS. 
The pumps must be installed in enclosed places, or at least protected against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, with threaded ports ISO 228/1. 
IMPELLER: brass, of the type with centrifugal radial flow. 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
HFm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector. 
HF: three-phase 230/400 V - 50 Hz. 
INSULATION: class F. 
PROTECTION: IP 44.