PT. Osmo Marina akan membabarkan beberapa Pompa-pompa dengan pipa flange dan kali ini akan membabarkan Pompa Pedrollo F Series yang memiliki banyak varians .

Pompa Pedrollo F Series ini berasal dari Italy dimana memiliki standart motor yaitu EFF 1 Efiseinsi kelas. Pompa Pedrollo F seri dipakai oleh sektor industri, sektor komstruksi sebab pompa ini closed coupled monoblock dimana tidak memakan tempat terutama pada konstruksi yang membutuhkan ruang kecil untuk rumah pompa.

Pompa Pedrollo F Seri memiliki kemampuan pada kisaran tekanan dorong hingga 95 meter dan kapasitas air mencapai 360 m3 / menit dan 6000 liter per menit . Pompa Pedrollo F mampu menahan suhu yang cukup panas hingga 90 Derajat untuk Pompa Centrifugal. Kemampuan pressure atau tekanan hingga 10 Bar.

Pompa Pedrollo ini sangat cocok untuk penggunaan pada transfer atau suplai air untuk pemanas mesin, pendingin mesin dan keperluan industri, keperluan gudang dan bangunan serta keperluan pertanian. 

Pompa ini memiliki material kuat yaitu pada bagian tubuh memiliki bahan besi coran (cast iron) dengan standar EN 733DIN 24255 , serta Body backplate yaitu cast iron ,serta bermacam-macam jenis impeller yaitu pada impeller brass/ kuningan yaitu F32/160 , F32/200 . F 40/160 , F 40/200, F 50/ 125, F50/160. Impeller cast iron adalah untuk model F40/250, F50/200. F50/250, F65/125, F65/160, F 65/200, F80/160, F100/160, motor shaft menggunakan stainless steel , mechanical seal.

 

Pompa Pedrollo F ini memiliki kemampuan head hingga 60 meter dan kapasitas mencapai 2000 liter per menit suatu pompa dengan kapasitas besar

 

Pompa pedrollo F Seri mampu menghisap air pada 7 meter dan mampu mengaliri air hingga 90 derajat celcius panasnya dan bisa diletakin pada keadaan sekitar maksimum 40 derajat celcius.

 

RANGE OF PERFORMANCE  Flow rate up to 2000 l/min (120 m³/h) Head up to 60 m 

LIMITS OF USE 
Manometric suction lift up to 7 m 
Liquid temperature from -10°C to + 90°C 
Environment temperature from -10°C to + 40°C 
Max. pressure in the pump body 10 bar (PN10) 

INSTALLATION AND USE 
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. 
THIS SERIES IS SUITABLE FOR SUPPLYING AND MOVING WATER, IN COOLING, HEATING, CIRCULATING AND CONDITIONING SYSTEMS, FOR FIRE FIGHTING, IRRIGATION, INDUSTRIAL AND AGRICULTURAL APPLICATIONS. 
Manifacture in accordance with dimensional standards EN 733 - DIN 24255 ensures models are fully interchangeable.The design allows the pump body to be removed without disconnecting it from the pipes (back pull out). 
The pumps must be installed in enclosed places, or at least protected  against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, complies with dimensional standards EN 733 - DIN 24255 and UNI 7467-NF E-44-111, with flanged suction and delivery ports complete with threaded steel counterflanges. 
BODY BACK-PLATE: cast iron. 
IMPELLER: brass for models F32/160, F32/200, F40/160, F40/200, F50/125 e F50/160. 
IMPELLER: cast iron for models F40/250, F50/200, F50/250, F65/125, F 65/160, F65/200, F80/160, F100/160 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, asynchronous type with high efficiency (class EFF1 for powers from 4 to 22 kW), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
Fm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector (up to 1.5 kW). 
F: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 22 kW. 
INSULATION: class F. 
PROTECTION: IP 44.

RANGE OF PERFORMANCE  Flow rate up to 2000 l/min (120 m³/h) Head up to 60 m 

LIMITS OF USE 
Manometric suction lift up to 7 m 
Liquid temperature from -10°C to + 90°C 
Environment temperature from -10°C to + 40°C 
Max. pressure in the pump body 10 bar (PN10) 

INSTALLATION AND USE 
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. 
THIS SERIES IS SUITABLE FOR SUPPLYING AND MOVING WATER, IN COOLING, HEATING, CIRCULATING AND CONDITIONING SYSTEMS, FOR FIRE FIGHTING, IRRIGATION, INDUSTRIAL AND AGRICULTURAL APPLICATIONS. 
Manifacture in accordance with dimensional standards EN 733 - DIN 24255 ensures models are fully interchangeable.The design allows the pump body to be removed without disconnecting it from the pipes (back pull out). 
The pumps must be installed in enclosed places, or at least protected  against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, complies with dimensional standards EN 733 - DIN 24255 and UNI 7467-NF E-44-111, with flanged suction and delivery ports complete with threaded steel counterflanges. 
BODY BACK-PLATE: cast iron. 
IMPELLER: brass for models F32/160, F32/200, F40/160, F40/200, F50/125 e F50/160. 
IMPELLER: cast iron for models F40/250, F50/200, F50/250, F65/125, F 65/160, F65/200, F80/160, F100/160 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, asynchronous type with high efficiency (class EFF1 for powers from 4 to 22 kW), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
Fm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector (up to 1.5 kW). 
F: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 22 kW. 
INSULATION: class F. 
PROTECTION: IP 44.

RANGE OF PERFORMANCE  Flow rate up to 2000 l/min (120 m³/h) Head up to 60 m 

LIMITS OF USE 
Manometric suction lift up to 7 m 
Liquid temperature from -10°C to + 90°C 
Environment temperature from -10°C to + 40°C 
Max. pressure in the pump body 10 bar (PN10) 

INSTALLATION AND USE 
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. 
THIS SERIES IS SUITABLE FOR SUPPLYING AND MOVING WATER, IN COOLING, HEATING, CIRCULATING AND CONDITIONING SYSTEMS, FOR FIRE FIGHTING, IRRIGATION, INDUSTRIAL AND AGRICULTURAL APPLICATIONS. 
Manifacture in accordance with dimensional standards EN 733 - DIN 24255 ensures models are fully interchangeable.The design allows the pump body to be removed without disconnecting it from the pipes (back pull out). 
The pumps must be installed in enclosed places, or at least protected  against inclement weather. 

CONSTRUCTION CHARACTERISTICS 
PUMP BODY: cast iron, complies with dimensional standards EN 733 - DIN 24255 and UNI 7467-NF E-44-111, with flanged suction and delivery ports complete with threaded steel counterflanges. 
BODY BACK-PLATE: cast iron. 
IMPELLER: brass for models F32/160, F32/200, F40/160, F40/200, F50/125 e F50/160. 
IMPELLER: cast iron for models F40/250, F50/200, F50/250, F65/125, F 65/160, F65/200, F80/160, F100/160 
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. 
MECHANICAL SEAL: ceramic - graphite - NBR. 
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, asynchronous type with high efficiency (class EFF1 for powers from 4 to 22 kW), quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty. 
Fm: single-phase 230 V - 50 Hz with capacitor and thermal overload protector (up to 1.5 kW). 
F: three-phase 230/400 V - 50 Hz up to 4 kW. 400/690 V - 50 Hz from 5.5 to 22 kW. 
INSULATION: class F. 
PROTECTION: IP 44.